神农架林区桑拿

宿迁附近想过夜电话联系

Welcome to the official website of Shanghai Cixi Instrument Co., Ltd!

Source manufacturer of flowmeter

Siemens CNC machining center for high precision flowmeter

The technology of micro flowmeter is ahead of the same industry in the world

 Wechat of Shanghai Cixi Instrument Co., Ltd
National Service Hotline

Micro flowmeter

product details

  • High quality material, good material, good product
    High quality SS316 and aluminum alloy guarantee performance
  • High precision, meet the high demand of customers
    The accuracy of 0.5% can meet the requirements of most working conditions
  • Stable pulse output signal
  • Perfect structure and good performance
    The minimum flow rate is 0.1ml/min and the pressure is 1000bar
  • Quality assurance worry free after sale
    Service life 3 ~ 5 years, low cost after-sales

Interpretation of design

Butchers are dedicated to craftsmanship spirit and break through the porcelain Xi flowmeter in the micro field. The minimum flow rate is 0.5ml/min, and the size is smaller. The size of one dollar coin is 25min, and the size of M2 is mm.

High quality materials can ensure the quality and performance of products, and bring better benefits and experience to individual customers.
Stainless steel series products, all stainless steel materials: including shell, gear and shaft body are 316L; aluminum alloy series: shell aluminum alloy, small flow gear, bearing SS316L.

The manufacturer imported foreign advanced equipment, cutting
The precision of the process is as high as 0.001mm.
The accuracy of the standard is 0.5%. In addition, the accuracy of some special media can reach 0.2%, which is higher than that of most of the peers.

Hall output, reed is pulse output
Select high-quality components from manufacturers to ensure stable model, rain proof and dust-proof, and design for harsh working conditions

[large range ratio exceeds 90% peer precision]

Parameters - micro commercial flowmeter
accuracy
The standard accuracy is + / - 0.5% FS, and the accuracy of medium with special viscosity can reach 0.2%
pressure
Standard pressure 32bar, customized high pressure, maximum pressure 1000bar
temperature
Standard temperature - ~ 30-80 ℃, customized high temperature, up to 250 ℃
output
Hall & reed type pulse output
power supply
4 ~ 26vdc power supply
Impulse coefficient
0.04ml/Pulsc~45ml/Pulse
Stainless steel series
texture of material
Shell: SS316L gear: SS316L bearing: SS316L
medium
Liquid: corrosive
Aluminum alloy series
texture of material
Shell: anodized aluminum alloy gear: anodized aluminum oxide bearing: SS316L
medium
Liquid: non corrosive

[large range ratio smaller flow]

Micro flowmeter corresponding parameters of commodity
model
Flow range
Connection size
Impulse coefficient
CX-M2
0.5~150ml/min
G1 / 8 internal thread
0.06ml/pulse
CX-M3
3~300ml/min
G1 / 8 internal thread
0.14ml/pulse
CX-M5
5~1000ml/min
G1 / 8 internal thread
0.36ml/pulse
CX-M6
0.5~100L/H
G1 / 4 internal thread
1ml/pulse
CX-M9
6~600L/H
G1 / 4 internal thread
5ml/pulse
CX-M12
0.3~30L/min
G1 / 2 internal thread
17.50ml/pulse
CX-M25
0.5~100L/min
G1 internal thread
45ml/pulse

[Seiko creates Mini shape of micro flowmeter]

Product Photograph

Installation interpretation

  • A pipeline cleaning requirements

    Before installation, the pipeline should be thoroughly cleaned, and a filter should be installed in front of the flowmeter to prevent impurities from entering. During the installation, please be sure to avoid dirt and impurities from entering the flow inlet port.

  • B installation direction requirements

    It should be noted that the axis of the flowmeter must be installed in a horizontal position, that is, the cover is perpendicular to the horizontal plane. For the micro flowmeter, the best installation method is down in and up out.

  • C liquid flow direction requirements

    The direction of the arrow on the flowmeter shell should be consistent with the liquid in the pipeline

  • D bypass

    For continuous flow pipeline and horizontal pipeline with flowmeter, bypass valve shall be installed for timely cleaning and maintenance.

  • Special requirements for liquid curing or easy installation

    It is suggested that the pipeline before and after the flowmeter should be long enough and corresponding measures should be taken to avoid liquid freezing in the pipeline where the flowmeter is located.

customer scene

[analysis condition, accurate application condition]

Condition 1: hydraulic system, hydraulic leakage, hydraulic oil

  • The working environment is harsh, the flowmeter needs to ensure long life
  • Test the hydraulic system, the working pressure is large, generally greater than 16MPa
  • When testing hydraulic oil, the medium must be kept pure, and the flow meter needs to filter impurities
  • Hydraulic system equipment is professional, flowmeter needs high performance and professional after-sales service

Condition 2: injector test bench

  • The flow range of nozzle test bench is 0.4-700ml/min
  • The minimum pulse coefficient of M3 is 0.07ml/pulse
  • No impurity should be added during the test. The flowmeter needs to be equipped with filter element

Condition 3: spraying equipment, painting equipment

  • High accuracy of flowmeter is required

  • The output of the flowmeter needs to be stable

  • Manual painting, painting time waste, mechanical painting is easy to cause waste

Condition 4: dispensing machine industry

  • Dispensing machine industry requires high precision flowmeter

  • Dispensing machine industry needs accurate control of flow

  • There are many kinds of medium and high viscosity in dispensing machine industry

  • Dispenser equipment requires a small flow range of flowmeter
 reminder  contact us